Cedar roof restauration experts

Cedar roof restauration experts

To shim or not to shim your cedar roof: That is the question

Learn about repair and maintenance of your cedar roof by shimming, which involves the use of metal shims.
Share
Share
Share
Share
Email
Print

Table of Contents

Cedar roofs are esthetically very pleasing, provided that the owner(s) take care of them properly through time in order to avoid deterioration and important issues. Care and maintenance of the cedar roof shingles, shakes and ridge caps are therefore essential.

Types of cedar roof repairs

Most homeowners are familiar with the following aspects of repairs and maintenance:

  • Full replacement of the cedar roof: this entails removing the entire current cedar roof and installing a new one. It could be stripped down including the roof sheathing or not including it (i.e. exposing the truss system.)
 
  • Partial replacement of the cedar roof: this entails removing a section of the current cedar roof and installing a new section locally.
 
  • Cedar shingles, shakes or ridge caps re-nailing: this entails re-nailing existing shingles, shakes and ridge caps that may be a little curved or unsecured to the roof.
 
  • Cedar shingles, shakes or ridge caps replacement: this entails removing the old cedar shingles, shakes or ridge caps, disposing of them and installing new ones. This is usually followed by cedar roof treatment to protect the new cedar pieces from the elements.
Credit: Structure Tech.

However, there is a very important type of repair and maintenance that is not always done correctly or not at all. What if the roof has holes in it between the shakes or shingles, or due to cracked shakes or shingles?

What is cedar roof shimming?

Shimming is the practice of inserting a piece of aluminum metal (called a shim) that measures about 2 ½” x about 8” under a split shake or shingle to create a water barrier. The shim’s edges are bent and pushed under defect to next course, so its end is aligned with the cedar shake or shingle.

Credit: Cedar Shake & Shingle Bureau.

How shims work

The edges of the shim are bent down to prevent it from sliding out after it is pushed in due to impact by rain, snow or hail. Depending on the tightness of the space under the shake or shingle, a shim may be forced in by hand, with gentle taps of a hammer or the use of specialized tools.

Credit: "Cedar Roof Care & Maintenance" report by Cedar Shake & Shingle Bureau.

It is worthy to note that although “this method is effective, however, no more than 20% of a roof area should be shimmed, for both roofing system integrity and cosmetic appearance purposes. If this 20% limit is reached, one should consider repairing the area with new shakes or shingles OR a complete re-roof job, depending upon the circumstance and level of damage.” (source: Cedar Shake & Shingle Bureau)

We strongly recommend that you hire professional companies, including Our Cedar Roofs Inc., to handle shimming by trained Roof Maintenance Technicians (RMTs).

Thank you for reading this article and we sincerely hope it was useful and informative.

Our Cedar Roofs Inc.
Restoration experts

Share
Share
Share
Share
Email
Print

Sources & credits

“Cedar Roof Care & Maintenance: Highlights” report by Cedar Shake & Shingle Bureau.

Related articles

Service and quality you can trust.®

Our Cedar Roofs is a market leader that helps Canadians extend the life of their cedar roofs and increase their home value in British Columbia.

Learn about

Our services

Read our latest

Blog articles

Slide left & right for

Before & after

slide me left & right